NewDumps的最新的Workday Workday-Pro-Integrations 認證考試練習題及答案問世之後，通過Workday Workday-Pro-Integrations 認證考試已經不再是IT職員的夢想了。NewDumps提供的所有關於Workday Workday-Pro-Integrations 認證考試練習題及答案品質都是是很高的，和真實的考試題目有95%的相似性。NewDumps是值得你擁有的。如果你選擇了NewDumps的產品，你就為Workday Workday-Pro-Integrations 認證考試做好了充分準備，成功通過考試就是很輕鬆的。
NewDumps 擬真試題覆蓋範圍可以達到近98％，含蓋PDF格式。成功的幫助你在短時間內通過 Workday-Pro-Integrations 考試，取得 Workday 認證。我們的 Workday-Pro-Integrations 擬真試題已經被很多考生使用，并得到了眾多的好評。而且現在購買還有機會贈送打折碼哦。作為臺灣地區最專業的IT認證題庫提供商，我們對所有購買 Workday-Pro-Integrations 題庫的客戶提供跟蹤服務，在您購買後享受半年的免費升級考題服務。
>> Workday-Pro-Integrations證照信息 <<
NewDumps就是一個能使Workday Workday-Pro-Integrations認證考試的通過率提高的一個網站。NewDumps的資深IT專家在不斷研究出各種成功通過Workday Workday-Pro-Integrations認證考試的方案，他們的研究成果可以100%保證一次性通過Workday Workday-Pro-Integrations 認證考試。。NewDumps提供的培訓工具是很有效的，有很多已經通過了一些IT認證考試的人就是用了NewDumps提供的練習題和答案，其中也有通過Workday Workday-Pro-Integrations認證考試，他們也是利用的NewDumps提供的便利。選擇NewDumps就選擇了成功。
問題 #11
Refer to the following XML data source to answer the question below.
You need the integration file to format the ps:Position_ID field to 10 characters, truncate the value if it exceeds, and align everything to the left.
How will you start your template match on ps:Position to use Document Transformation (DT) to do the transformation using XTT?
答案：A
解題說明：
In Workday integrations, Document Transformation (DT) using XSLT with Workday Transformation Toolkit (XTT) attributes is used to transform XML data, such as the output from a Core Connector or EIB, into a specific format for third-party systems. In this scenario, you need to transform the ps:Position_ID field within the ps:Position element to a fixed length of 10 characters, truncate the value if it exceeds 10 characters, and align the output to the left. The template must match the ps:Position element and apply these formatting rules using XTT attributes.
Here's why option A is correct:
* Template Matching: The <xsl:template match="ps:Position"> correctly targets the ps:Position element in the XML, as shown in the provided snippet, ensuring the transformation applies to the appropriate node.
* XTT Attributes:
* xtt:fixedLength="10" specifies that the Pos_ID field should be formatted to a fixed length of 10 characters. If the ps:Position_ID value exceeds 10 characters, it will be truncated (by default, XTT truncates without raising an error unless explicitly configured otherwise), meeting the requirement to truncate if the value exceeds.
* xtt:align="left" ensures that the output is left-aligned within the 10-character field, aligning with the requirement to align everything to the left.
* XPath Selection: The <xsl:value-of select="ps:Position_Data/ps:Position_ID"/> correctly extracts the ps:Position_ID value (e.g., "P-00030") from the ps:Position_Data child element, as shown in the XML structure.
* Output Structure: The <Position><Pos_ID>...</Pos_ID></Position> structure ensures the transformed data is wrapped in meaningful tags for the target system, maintaining consistency with Workday integration practices.
Why not the other options?
* B.
xml
WrapCopy
<xsl:template xtt:align="left" match="ps:Position">
<Position>
<Pos_ID xtt:fixedLength="10">
<xsl:value-of select="ps:Position_Data/ps:Position_ID"/>
</Pos_ID>
</Position>
</xsl:template>
This applies xtt:align="left" to the xsl:template element instead of the Pos_ID element. XTT attributes like fixedLength and align must be applied directly to the element being formatted (Pos_ID), not the template itself, making this incorrect.
* C.
xml
WrapCopy
<xsl:template match="ps:Position">
<Position xtt:fixedLength="10">
<Pos_ID xtt:align="left">
<xsl:value-of select="ps:Position_Data/ps:Position_ID"/>
</Pos_ID>
</Position>
</xsl:template>
This applies xtt:fixedLength="10" to the Position element and xtt:align="left" to Pos_ID. However, XTT attributes like fixedLength and align should be applied to the specific field being formatted (Pos_ID), not the parent element (Position). This misplacement makes it incorrect.
* D.
xml
WrapCopy
<xsl:template xtt:fixedLength="10" match="ps:Position">
<Position>
<Pos_ID xtt:align="left">
<xsl:value-of select="ps:Position_Data/ps:Position_ID"/>
</Pos_ID>
</Position>
</xsl:template>
This applies xtt:fixedLength="10" to the xsl:template element and xtt:align="left" to Pos_ID. Similar to option B, XTT attributes must be applied to the specific element (Pos_ID) being formatted, not the template itself, making this incorrect.
To implement this in XSLT for a Workday integration:
* Use the template from option A to match ps:Position, apply xtt:fixedLength="10" and xtt:align="left" to the Pos_ID element, and extract the ps:Position_ID value using the correct XPath. This ensures the ps:
Position_ID (e.g., "P-00030") is formatted to 10 characters, truncated if necessary, and left-aligned, meeting the integration file requirements.
References:
* Workday Pro Integrations Study Guide: Section on "Document Transformation (DT) and XTT" - Details the use of XTT attributes like fixedLength and align for formatting data in XSLT transformations, including truncation behavior.
* Workday Core Connector and EIB Guide: Chapter on "XML Transformations" - Explains how to use XSLT templates with XTT attributes to transform position data, including fixed-length formatting and alignment.
* Workday Integration System Fundamentals: Section on "XTT in Integrations" - Covers the application of XTT attributes to specific fields in XML for integration outputs, ensuring compliance with formatting requirements like length and alignment.
問題 #12
Refer to the following scenario to answer the question below.
You need to configure a Core Connector: Candidate Outbound integration for your vendor. The connector requires the data initialization service (DIS).
The vendor requests additional formatting of the candidate Country field. For example, if a candidate's country is the United States of America, the output should show USA.
What steps do you follow to meet this request?
答案：D
解題說明：
The scenario involves a Core Connector: Candidate Outbound integration with the Data Initialization Service (DIS), where the vendor requires the "Country" field to be formatted differently (e.g., "United States of America" to "USA"). This is a data transformation requirement, and Core Connectors provide specific tools to handle such formatting. Let's evaluate the solution:
* Requirement:The vendor needs a shortened country code (e.g., "USA" instead of "United States of America") in the output file. This involves transforming the delivered "Country" field value from the Candidate business object into a vendor-specific format.
* Integration Maps:In Workday Core Connectors,integration mapsare used to transform or map field values from Workday's format to a vendor's required format. For example, you can create a map that replaces "United States of America" with "USA," "Canada" with "CAN," etc. This is configured via the
"Configure Integration Maps" related action on the integration system, allowing you to define a lookup table or rule-based transformation for the Country field.
* Option Analysis:
* A. Use an Evaluated Expression calculation and add it to the integration's report data source: Incorrect. While an Evaluate Expression calculated field could transform the value (e.g., if-then logic), Core Connectors don't directly use report data sources for output formatting.
Calculated fields are better suited for custom reports or EIBs, not Core Connector field mapping.
* B. Use the integration related action Configure Integration Population Eligibility: Incorrect.
This action filters the population of candidates included (e.g., based on eligibility criteria), not the formatting of individual fields like Country.
* C. Use the integration services to only output shortened country codes: Incorrect. Integration services define the dataset or events triggering the integration, not field-level formatting or transformations.
* D. Use the integration related action Configure Integration Maps: Correct. Integration maps are the standard Core Connector tool for transforming field values (e.g., mapping "United States of America" to "USA") to meet vendor requirements.
* Implementation:
* Navigate to the Core Connector: Candidate Outbound integration system.
* Use the related actionConfigure Integration Maps.
* Create a new map for the "Country" field (e.g., Source Value: "United States of America," Target Value: "USA").
* Apply the map to the Country field in the integration output.
* Test the output file to ensure the transformed value (e.g., "USA") appears correctly.
References from Workday Pro Integrations Study Guide:
* Core Connectors & Document Transformation: Section on "Configuring Integration Maps" details how to transform field values for vendor-specific formatting.
* Integration System Fundamentals: Explains how Core Connectors handle data transformation through maps rather than calculated fields or services for field-level changes.
問題 #13
You are configuring integration security for a Core Connector integration system. How do you find the web service operation used by the connector template?
答案：D
解題說明：
When setting up security for a Core Connector integration system in Workday, you need to know which web service operation the connector template uses. The best way is to run the "Integration Template Catalog report" within your Workday tenant. This report lists all integration templates and should include details about the web service operations they use, making it easy to configure security.
Why This Matters
This method is efficient because it lets you find the information before running the system, which is crucial for setting up permissions correctly. It's surprising that such a specific report exists, as it simplifies a task that could otherwise involve running the system or guessing from API references.
How It Works
* Select the report in your Workday tenant to see a list of all Core Connector templates.
* Look for the template you're using and find the associated web service operation listed in the report.
* Use this information to set up the right security permissions for your integration.
For more details, check out resources likeWorkday Core ConnectorsorWorkday Integrations.
問題 #14
When creating an ISU, what should you do to ensure the user only authenticates via web services?
答案：B
解題說明：
When creating an Integration System User (ISU) in Workday, the goal is often to ensure that the user is restricted to performing tasks via web services (e.g., API calls or integrations) and cannot log into the Workday user interface (UI). This is a critical security measure to limit the ISU's access to only what is necessary for integration purposes, adhering to the principle of least privilege. Let's evaluate each option provided in the question to determine the correct approach based on Workday's functionality and best practices as outlined in official documentation and the Workday Pro Integrations program.
* Option A: Choose a constrained security group.In Workday, security groups define the permissions and access levels for users, including ISUs. There are two types of Integration System Security Groups (ISSGs): constrained and unconstrained. A constrained ISSG limits access to specific organizations or data scopes, while an unconstrained ISSG provides broader access across the tenant. While choosing a constrained security group can enhance security by limiting the scope of data the ISU can access, it does not directly control whether the ISU authenticates via web services or the UI. The type of security group affects data access permissions, not the authentication method or UI access. Therefore, this option does not address the requirement of ensuring authentication only via web services.
* Option B: Select the Do Not Allow UI Sessions checkbox.When creating an ISU in Workday, the
"Create Integration System User" task presents an option labeled "Do Not Allow UI Sessions." Selecting this checkbox explicitly prevents the ISU from logging into the Workday UI using its credentials. This setting ensures that the ISU can only authenticate and operate through programmatic means, such as web service calls (e.g., SOAP or REST APIs), which is precisely the intent of the question. This is a standard security practice recommended by Workday to isolate integration activities from interactive user sessions, reducing the risk of misuse or unauthorized access through the UI. This option directly aligns with the requirement and is the correct answer.
* Option C: Update the session timeout minutes.The "Session Timeout Minutes" field in the ISU creation task determines how long an ISU's session remains active before it expires. By default, this is set to 0, meaning the session does not expire, which is suitable for integrations that require continuous operation without interruption. Updating this value (e.g., setting it to a specific number of minutes) would cause the session to time out after that period, potentially disrupting long-running integrations.
However, this setting pertains to session duration, not the method of authentication or whether UI access is allowed. It does not prevent the ISU from logging into the UI or ensure that authentication occurs only via web services, making this option irrelevant to the question.
* Option D: Generate a random password.Generating a random password for the ISU is a good security practice to ensure the credentials are strong and not easily guessable. However, the password itself does not dictate how the ISU authenticates or whether it can access the UI. A random password enhances security but does not inherently restrict the ISU to web service authentication. Without selecting "Do Not Allow UI Sessions," the ISU could still log into the UI with that password, assuming no other restrictions are applied. Thus, this option does not fulfill the requirement of ensuring authentication only via web services.
Why Option B is Correct
The "Do Not Allow UI Sessions" checkbox is a specific configuration in the ISU setup process that directly enforces the restriction of authentication to web services. This setting is part of Workday's security framework for integrations, ensuring that ISUs-designed as non-human accounts for programmatic access- cannot be used interactively. This aligns with Workday's best practices for securing integrations, as outlined in the Workday Pro Integrations Study Guide and related documentation. For example, when an ISU is created with this checkbox selected, any attempt to log into the Workday UI with its credentials will fail, while web service requests (e.g., via SOAP or REST APIs) will succeed, assuming proper permissions are granted via an ISSG.
Practical Application
To implement this in Workday:
* Log into your Workday tenant with administrative privileges.
* Search for and select the "Create Integration System User" task.
* Enter a username and password for the ISU.
* Check the "Do Not Allow UI Sessions" checkbox.
* Leave "Session Timeout Minutes" at 0 (default) to avoid session expiration during integrations.
* Save the ISU and assign it to an appropriate ISSG (constrained or unconstrained, depending on the integration's needs).
This configuration ensures the ISU is locked to web service authentication, meeting the question's objective.
Verification with Workday Documentation
The Workday Pro Integrations Study Guide emphasizes securing ISUs by restricting them to integration- specific tasks. The "Do Not Allow UI Sessions" option is highlighted as a key control for preventing UI access, ensuring that ISUs operate solely through web services. This is also consistent with broader Workday security training materials, such as those available on Workday Community, which stress isolating integration accounts from human user activities.
Workday Pro Integrations Study Guide References
* Section: Integration Security Fundamentals- Discusses the role of ISUs and the importance of restricting their access to programmatic interactions.
* Section: Configuring Integration System Users- Details the "Create Integration System User" task, including the "Do Not Allow UI Sessions" checkbox as a security control.
* Section: Best Practices for Integration Security- Recommends using this setting to enforce least privilege and protect the tenant from unauthorized UI access by integration accounts.
問題 #15
Refer to the following XML and example transformed output to answer the question below.
Example transformed wd:Report_Entry output;
What is the XSLT syntax tor a template that matches onwd: Educationj3roup to produce the degree data in the above Transformed_Record example?
答案：B
解題說明：
In Workday integrations, XSLT is used to transform XML data, such as the output from a web service- enabled report or EIB, into a desired format for third-party systems. In this scenario, you need to create an XSLT template that matches the wd:Education_Group element in the provided XML and transforms it to produce the degree data in the format shown in the Transformed_Record example. The goal is to output each degree (e.g., "California University MBA" and "Georgetown University B.S.") as a <Degree> element within a <Degrees> parent element.
Here's why option A is correct:
* Template Matching: The <xsl:template match="wd:Education_Group"> correctly targets the wd:
Education_Group element in the XML, which contains multiple wd:Education elements, each with a wd:Degree child, as shown in the XML snippet (e.g., <wd:Education>California University</wd:
Education><wd:Degree>MBA</wd:Degree>).
* Transformation Logic:
* <Degree> creates the outer <Degree> element for each education group, matching the structure in the Transformed_Record example (e.g., <Degree>California University MBA</Degree>).
* <xsl:copy><xsl:value-of select="*"/></xsl:copy> copies the content of the child elements (wd:
Education and wd:Degree) and concatenates their values into a single string. The select="*" targets all child elements of wd:Education_Group, and xsl:value-of outputs their text content (e.
g., "California University" and "MBA" become "California University MBA").
* This approach ensures that each wd:Education_Group is transformed into a single <Degree> element with the combined text of the wd:Education and wd:Degree values, matching the example output.
* Context and Output: The template operates on each wd:Education_Group, producing the nested structure shown in the Transformed_Record (e.g., <Degrees><Degree>CaliforniaUniversity MBA<
/Degree><Degree>Georgetown University B.S.</Degree></Degrees>), assuming a parent template or additional logic wraps the <Degree> elements in <Degrees>.
Why not the other options?
* B.
xml
WrapCopy
<xsl:template match="wd:Education_Group">
<Degree>
<xsl:value-of select="*"/>
</Degree>
</xsl:template>
This uses <xsl:value-of select="*"/> without <xsl:copy>, which outputs the concatenated text of all child elements but does not preserve any XML structure or formatting. It would produce plain text (e.g., "California UniversityMBACalifornia UniversityB.S.") without the proper <Degree> tags, failing to match the structured output in the example.
* C.
xml
WrapCopy
<xsl:template match="wd:Education_Group">
<Degree>
<xsl:copy select="*"/>
</Degree>
</xsl:template>
This uses <xsl:copy select="*"/>, but <xsl:copy> does not take a select attribute-it simply copies the current node. This would result in an invalid XSLT syntax and fail to produce the desired output, making it incorrect.
* D.
xml
WrapCopy
<xsl:template match="wd:Education_Group">
<Degree>
<xsl:copy-of select="*"/>
</Degree>
</xsl:template>
This uses <xsl:copy-of select="*"/>, which copies all child nodes (e.g., wd:Education and wd:Degree) as-is, including their element structure, resulting in output like <Degree><wd:Education>California University</wd:
Education><wd:Degree>MBA</wd:Degree></Degree>. This does not match the flattened, concatenated text format in the Transformed_Record example (e.g., <Degree>California University MBA</Degree>), making it incorrect.
To implement this in XSLT for a Workday integration:
* Use the template from option A to match wd:Education_Group, apply <xsl:copy><xsl:value-of select="
*"/></xsl:copy> to concatenate and output the wd:Education and wd:Degree values as a single
<Degree> element. This ensures the transformation aligns with the Transformed_Record example, producing the required format for the integration output.
References:
* Workday Pro Integrations Study Guide: Section on "XSLT Transformations for Workday Integrations"
- Details the use of <xsl:template>, <xsl:copy>, and <xsl:value-of> for transforming XML data, including handling grouped elements like wd:Education_Group.
* Workday EIB and Web Services Guide: Chapter on "XML and XSLT for Report Data" - Explains the structure of Workday XML (e.g., wd:Education_Group, wd:Education, wd:Degree) and how to use XSLT to transform education data into a flattened format.
* Workday Reporting and Analytics Guide: Section on "Web Service-Enabled Reports" - Covers integrating report outputs with XSLT for transformations, including examples of concatenating and restructuring data for third-party systems.
問題 #16
......
為了讓你們更放心地選擇NewDumps，NewDumps的最佳的Workday Workday-Pro-Integrations考試材料已經在網上提供了部分免費下載，你可以免費嘗試來確定我們的可靠性。我們不僅可以幫你一次性地通過考試，同時還可以幫你節約寶貴的時間和精力。NewDumps能為你提供真實的 Workday Workday-Pro-Integrations認證考試練習題和答案來確保你考試100%通過。通過了Workday Workday-Pro-Integrations 認證考試你的地位將在IT行業中也有很大的提升，你的明天也會跟那美好。
Workday-Pro-Integrations考古題更新: https://www.newdumpspdf.com/Workday-Pro-Integrations-exam-new-dumps.html
Workday Workday-Pro-Integrations證照信息 只要你利用了適當的方法，輕鬆地通過考試也不是不可能的，很多曾經參加IT專業相關認證考試的人都是通過我們的 Workday-Pro-Integrations – Workday Pro Integrations Certification Exam考古題提供的測試練習題和答案考過的，因此 Workday Workday-Pro-Integrations 考古題在IT行業中得到了很高的聲譽和良好的口碑，這也顯示了 Workday Workday-Pro-Integrations 認證對您未來事業的重要程度，還有考生之所以喜歡練習Workday-Pro-Integrations题库，就是為了獲得練習的成就感，有些使用我們類比測試軟體已經通過相關IT認證考試的人成為了NewDumps Workday-Pro-Integrations考古題更新的回頭客，NewDumps Workday-Pro-Integrations考古題更新绝对是一个全面保障你的利益，设身处地为你考虑的网站。
此番入豫州，寧小堂和沈凝兒便打算著去懸空寺遊歷壹番，咱們還是Workday-Pro-Integrations辦正經事要緊，只要你利用了適當的方法，輕鬆地通過考試也不是不可能的，很多曾經參加IT專業相關認證考試的人都是通過我們的Workday-Pro-Integrations – Workday Pro Integrations Certification Exam考古題提供的測試練習題和答案考過的，因此 Workday Workday-Pro-Integrations 考古題在IT行業中得到了很高的聲譽和良好的口碑。
這也顯示了 Workday Workday-Pro-Integrations 認證對您未來事業的重要程度，還有考生之所以喜歡練習Workday-Pro-Integrations题库，就是為了獲得練習的成就感，有些使用我們類比測試軟體已經通過相關IT認證考試的人成為了NewDumps的回頭客。
